This is how the
Sensaru System works
The Sensaru system analyzes the actual energy requirements of your heating systems and automatically optimizes them - for lower costs and greater sustainability.
Energy-consuming heating systems
As efficient as a car in stop-and-go on the A10 from Berlin to Hamburg
Most heating systems regulate their energy demand based on two parameters:
Outside temperature sensor
Measures the outside temperature and regulates the heating power. More heat is produced in cold weather, less in milder temperatures.
return temperature
Indicates how much heat the water has lost on the way back. The cooler the water returns, the more heat needs to be generated.
The problem
The constant adjusting up and down causes a high energy consumption – like driving on a highway in stop-and-go traffic.
Smart regulation with the Sensaru system
This is how your heating system works with the Sensaru system – energy-efficient, environmentally friendly, and cost-saving.
Step 1
Gateway and smart sensors
The Sensaru system is integrated into your existing heating system. Smart sensors capture precise data such as supply and return temperatures, the outside temperature, and the actual heat demand of your building.
Step 2
AI-driven regulation in the cloud
The sensors send the data directly to the cloud. There, the AI continuously analyzes the heating system and optimizes the system so that only the energy needed to maintain the desired temperature is provided. The comfort of the tenants is not affected.
Step 3
Heating curve optimization
Sensaru acts between the outdoor temperature sensor and the heating control. The system continuously modifies the signal so that the heating perceives a different outdoor temperature. This adjusts the heating output to the actual demand – without loss of comfort for the residents.
Your advantages at a glance
Energy saving
Thanks to the optimized regulation, the heating system operates more consistently and avoids unnecessary energy losses. This noticeably increases energy efficiency.
Extended operating hours
Sensaru ensures that the heating runs more evenly and for a longer time, instead of constantly turning on and off. This reduces wear and extends the lifespan of the system.
Increase in property value
By reducing the primary energy demand, the property rises to one to two higher energy classes. This increases the value of the property.
Old regulation as a backup
If the Sensaru system fails, it will automatically switch back to the internal heating regulation. The customer retains system sovereignty at all times and can manually activate the 'old' regulation.
Full control
Through the dashboard, property managers have direct access to measurement data, analyses, and energy reports – and can see at any time how their heating systems are performing.
Smart regulation with the Sensaru system
Step 1
Gateway and smart sensors
Step 2
AI-driven regulation in the cloud
Step 3
Heating curve optimization
The Sensaru system
Monitoring set
Regulation set
With the Sensaru control set, you can significantly reduce your heating costs using our AI-driven control algorithm and specially developed sensors from the monitoring set.
